Modular Plus is the line of compact and powerful fog systems with C PLUS electronic board.
Fogging system with patented FOG STORM PUMP and “LAYER” heating technologies.
Modular Plus line includes all the latest patented technologies as FOG STORM mechanical pump and “LAYER” technology exchange systems for fast and very dry fog shoot.
CPLUS electronic board
CPLUS electronic board equipped with 3 serial SLOTS to insert more expansion boards at once, 5 relay cabled outputs and 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR).
The front cover is made of plastic material to make the wireless communication easier between the internally installed devices and the outside.
97% thefts avoided
5 models of anti-intrusion fogging systems from
5 MODULAR PLUS MODELS
MODULAR 2 PLUS
Fog emission and saturation
up to 600 m³ in 28 seconds
(200 m³ visibility less than 1 m)
Wall and ceiling installation
| Dimensions
|
| Product code | FPU03ESM200C |
| Compact cabinet | yes |
| Weight of the fogging system | 7,5 Kg |
| Overall packaging weight | 8,5 Kg |
| Units on one pallet (100×120 cm) | 42 |
| Dimensions of the fogging system | L 30,0 x W 13,0 x H 39,0 cm |
| Size of the packaging | L 36,0 x W 19,0 x H 45,0 cm |
| Color | white |
| Operating time without mains power | over 1 hour |
| Heating time | around 1,5 hour |
| Vertical mounting | yes |
| Horizontal mounting | yes |
| Usb port for computer monitoring (Windows and Linux) | yes |
| Serial interface RS232 with UR FOG Standard protocol | yes |
| Lan Connection : Active Cloud | optional |
| “Layer” heating system | yes |
| Single shot coverage (visibility more than 1,5 m) | up to 600 m3 |
| Single shot coverage (visibility less than 1 m) | up to 200 m3 |
| Maximum emission time in a single shot | 28 sec |
| Total discharge capability with full bag | 1275 m³ |
| Number of bags | 1 |
| Amount of fluid in the bag | 750 ml |
| Shot characteristics | programmabile in sec. |
| Number of bags included | 1 |
| 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR). First three accept positive (PNP) or negative (NPN) signals. It is possible to set “active security” or “passive security”. | yes |
| 5 relay cabled outputs: fault, programmable output, empty bag, low battery/lack of power supply and shooting confirmation | yes |
| Top internal riser for optional boards | yes |
| Side internal riser for optional boards | yes |
| Front panel made of plastic material | yes |
| 3 slot: internal multi slot to insert more expansion boards at once | yes |
| Mains power | 230 V or 120 V |
| Average consumption | 37 W |
| Heater max power in start | 170 W |
| 2 Ah 12V back up battery (not included) | yes |
 | Cod. FFLXRC4/5FG Fluid bag 750 ml |
 | Cod. FFLXRC4/5 Fluid bag 750 ml |
 | Cod. FPUTRCP Top riser |
 | Cod. FPUSRCP Side riser |
 | Cod. FPUSTD Desk stand |
 | Cod. FPUWB Orientable wall bracket |
 | Cod. F23KITDM Demo kit: key and keyfob/receiver |
 | Cod. URCLWF Active Cloud LAN/WiFi board (optional WiFi antenna) |
 | Cod. URCLWFS ActiveServer LAN / Wi-Fi board (optional WiFi antenna) |
 | Cod. URCLWFA WiFi antenna |
 | Cod. URCLWFMP Mounting Kit for Active Cloud/ Active Server board: cable 12V, flat cable Modular Plus, top riser and 4X10 mm spacers |
 Download | Modular 2 Plus data sheet |
MODULAR 3 PLUS
Fog emission and saturation
up to 900 m³ in 40 seconds
(300 m³ visibility less than 1 m)
| Wall and ceiling installation
| Dimensions
|
| Product code | FPU03ESM300C |
| Compact cabinet | yes |
| Weight of the fogging system | 8 Kg |
| Overall packaging weight | 9 Kg |
| Units on one pallet (100×120 cm) | 42 |
| Dimensions of the fogging system | L 30,0 x W 13,0 x H 39,0 cm |
| Size of the packaging | L 36,0 x W 19,0 x H 45,0 cm |
| Color | white |
| Operating time without mains power | over 1 hour |
| Heating time | around 1 hour |
| Vertical mounting | yes |
| Horizontal mounting | yes |
| Usb port for computer monitoring (Windows and Linux) | yes |
| Serial interface RS232 with UR FOG Standard protocol | yes |
| Lan Connection : Active Cloud | optional |
| “Layer” heating system | yes |
| Single shot coverage (visibility more than 1,5 m) | up to 900 m3 |
| Single shot coverage (visibility less than 1 m) | up to 300 m3 |
| Maximum emission time in a single shot | 40 sec |
| Total discharge capability with full bag | 1275 m³ |
| Number of bags | 1 |
| Amount of fluid in the bag | 750 ml |
| Shot characteristics | programmabile in sec. |
| Number of bags included | 1 |
| 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR). First three accept positive (PNP) or negative (NPN) signals. It is possible to set “active security” or “passive security”. | yes |
| 5 relay cabled outputs: fault, programmable output, empty bag, low battery/lack of power supply and shooting confirmation | yes |
| Top internal riser for optional boards | yes |
| Side internal riser for optional boards | yes |
| Front panel made of plastic material | yes |
| 3 slot: internal multi slot to insert more expansion boards at once | yes |
| Mains power | 230 V or 120 V |
| Average consumption | 37 W |
| Heater max power in start | 170 W |
| 2 Ah 12V back up battery (not included) | yes |
| Cod. FFLXRC4/5FG Fluid bag 750 ml |
| Cod. FFLXRC4/5 Fluid bag 750 ml |
| Cod. FPUTRCP Top riser |
| Cod. FPUSRCP Side riser |
| Cod. FPUSTD Desk stand |
| Cod. FPUWB Orientable wall bracket |
| Cod. F23KITDM Demo kit: key and keyfob/receiver |
| Cod. URCLWF Active Cloud LAN/WiFi board (optional WiFi antenna) |
| Cod. URCLWFS ActiveServer LAN / Wi-Fi board (optional WiFi antenna) |
| Cod. URCLWFA WiFi antenna |
| Cod. URCLWFMP Mounting Kit for Active Cloud/ Active Server board: cable 12V, flat cable Modular Plus, top riser and 4X10 mm spacers |
| Download | Modular 3 Plus data sheet |
MODULAR 4 PLUS
Fog emission and saturation
up to 1200 m³ in 46 seconds
(400 m³ visibility less than 1 m)
| Wall and ceiling installation
| Dimensions
|
| Product code | FPU03ESM400C |
| Compact cabinet | yes |
| Weight of the fogging system | 8,5 Kg |
| Overall packaging weight | 9,5 Kg |
| Units on one pallet (100×120 cm) | 42 |
| Dimensions of the fogging system | L 30,0 x W 13,0 x H 39,0 cm |
| Size of the packaging | L 36,0 x W 19,0 x H 45,0 cm |
| Color | white |
| Operating time without mains power | over 1 hour |
| Heating time | around 1 hour |
| Vertical mounting | yes |
| Horizontal mounting | yes |
| Usb port for computer monitoring (Windows and Linux) | yes |
| Serial interface RS232 with UR FOG Standard protocol | yes |
| Lan Connection : Active Cloud | optional |
| “Layer” heating system | yes |
| Single shot coverage (visibility more than 1,5 m) | up to 1200 m3 |
| Single shot coverage (visibility less than 1 m) | up to 400 m3 |
| Maximum emission time in a single shot | 46 sec |
| Total discharge capability with full bag | 1275 m³ |
| Number of bags | 1 |
| Amount of fluid in the bag | 750 ml |
| Shot characteristics | programmabile in sec. |
| Number of bags included | 1 |
| 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR). First three accept positive (PNP) or negative (NPN) signals. It is possible to set “active security” or “passive security”. | yes |
| 5 relay cabled outputs: fault, programmable output, empty bag, low battery/lack of power supply and shooting confirmation | yes |
| Top internal riser for optional boards | yes |
| Side internal riser for optional boards | yes |
| Front panel made of plastic material | yes |
| 3 slot: internal multi slot to insert more expansion boards at once | yes |
| Mains power | 230 V or 120 V |
| Average consumption | 37 W |
| Heater max power in start | 170 W |
| 2 Ah 12V back up battery (not included) | yes |
| Cod. FFLXRC4/5FG Fluid bag 750 ml |
| Cod. FFLXRC4/5 Fluid bag 750 ml |
| Cod. FPUTRCP Top riser |
| Cod. FPUSRCP Side riser |
| Cod. FPUSTD Desk stand |
| Cod. FPUWB Orientable wall bracket |
| Cod. F23KITDM Demo kit: key and keyfob/receiver |
| Cod. URCLWF Active Cloud LAN/WiFi board (optional WiFi antenna) |
| Cod. URCLWFS ActiveServer LAN / Wi-Fi board (optional WiFi antenna) |
| Cod. URCLWFA WiFi antenna |
| Cod. URCLWFMP Mounting Kit for Active Cloud/ Active Server board: cable 12V, flat cable Modular Plus, top riser and 4X10 mm spacers |
| Download | Modular 4 Plus data sheet |
MODULAR 5 PLUS
Fog emission and saturation
up to 1500 m³ in 48 seconds
(500 m³ visibility less than 1 m)
| Wall and ceiling installation
| Dimensions
|
| Product code | FPU03ESM500C |
| Compact cabinet | yes |
| Weight of the fogging system | 9 Kg |
| Overall packaging weight | 10 Kg |
| Units on one pallet (100×120 cm) | 42 |
| Dimensions of the fogging system | L 30,0 x W 13,0 x H 39,0 cm |
| Size of the packaging | L 36,0 x W 19,0 x H 45,0 cm |
| Color | white |
| Operating time without mains power | over 1 hour |
| Heating time | around 2 hours |
| Vertical mounting | yes |
| Horizontal mounting | yes |
| Usb port for computer monitoring (Windows and Linux) | yes |
| Serial interface RS232 with UR FOG Standard protocol | yes |
| Lan Connection : Active Cloud | optional |
| “Layer” heating system | yes |
| Single shot coverage (visibility more than 1,5 m) | up to 1500 m3 |
| Single shot coverage (visibility less than 1 m) | up to 500 m3 |
| Maximum emission time in a single shot | 48 sec |
| Total discharge capability with full bag | 1275 m³ |
| Number of bags | 1 |
| Amount of fluid in the bag | 750 ml |
| Shot characteristics | programmabile in sec. |
| Number of bags included | 1 |
| 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR). First three accept positive (PNP) or negative (NPN) signals. It is possible to set “active security” or “passive security”. | yes |
| 5 relay cabled outputs: fault, programmable output, empty bag, low battery/lack of power supply and shooting confirmation | yes |
| Top internal riser for optional boards | yes |
| Side internal riser for optional boards | yes |
| Front panel made of plastic material | yes |
| 3 slot: internal multi slot to insert more expansion boards at once | yes |
| Mains power | 230 V or 120 V |
| Average consumption | 48 W |
| Heater max power in start | 280 W |
| 2 Ah 12V back up battery (not included) | yes |
| Cod. FFLXRC4/5FG Fluid bag 750 ml |
| Cod. FFLXRC4/5 Fluid bag 750 ml |
| Cod. FPUTRCP Top riser |
| Cod. FPUSRCP Side riser |
| Cod. FPUSTD Desk stand |
| Cod. FPUWB Orientable wall bracket |
| Cod. F23KITDM Demo kit: key and keyfob/receiver |
| Cod. URCLWF Active Cloud LAN/WiFi board (optional WiFi antenna) |
| Cod. URCLWFS ActiveServer LAN / Wi-Fi board (optional WiFi antenna) |
| Cod. URCLWFA WiFi antenna |
| Cod. URCLWFMP Mounting Kit for Active Cloud/ Active Server board: cable 12V, flat cable Modular Plus, top riser and 4X10 mm spacers |
| Download | Modular 5 Plus data sheet |
MODULAR 8 PLUS
Fog emission and saturation
up to 2400 m³ in 64 seconds
(800 m³ visibility less than 1 m)
| Wall and ceiling installation
| Dimensions
|
| Product code | FPU03ESM800C |
| Compact cabinet | yes |
| Weight of the fogging system | 9,5 Kg |
| Overall packaging weight | 10,5 Kg |
| Units on one pallet (100×120 cm) | 42 |
| Dimensions of the fogging system | L 30,0 x W 13,0 x H 39,0 cm |
| Size of the packaging | L 36,0 x W 19,0 x H 45,0 cm |
| Color | white |
| Operating time without mains power | over 1 hour |
| Heating time | around 2 hours |
| Vertical mounting | yes |
| Horizontal mounting | yes |
| Usb port for computer monitoring (Windows and Linux) | yes |
| Serial interface RS232 with UR FOG Standard protocol | yes |
| Lan Connection : Active Cloud | optional |
| “Layer” heating system | yes |
| Single shot coverage (visibility more than 1,5 m) | up to 2400 m3 |
| Single shot coverage (visibility less than 1 m) | up to 800 m3 |
| Maximum emission time in a single shot | 64 sec |
| Total discharge capability with full bag | 1700 m³ |
| Number of bags | 1 |
| Amount of fluid in the bag | 1000 ml |
| Shot characteristics | programmabile in sec. |
| Number of bags included | 1 |
| 4 wired inputs: arm, shoot, programmable input and verification sensor (PIR). First three accept positive (PNP) or negative (NPN) signals. It is possible to set “active security” or “passive security”. | yes |
| 5 relay cabled outputs: fault, programmable output, empty bag, low battery/lack of power supply and shooting confirmation | yes |
| Top internal riser for optional boards | no |
| Side internal riser for optional boards | yes |
| Front panel made of plastic material | yes |
| 3 slot: internal multi slot to insert more expansion boards at once | yes |
| Mains power | 230 V or 120 V |
| Average consumption | 48 W |
| Heater max power in start | 280 W |
| 2 Ah 12V back up battery (not included) | yes |
| Cod. FFLXTRC8FG Fluid bag 1000 ml |
| Cod. FFLXTRC8 Fluid bag 1000 ml |
| Cod. FPUSRCP Side riser |
| Cod. FPUSTD Desk stand |
| Cod. FPUWB Orientable wall bracket |
| Cod. F23KITDM Demo kit: key and keyfob/receiver |
| Cod. URCLWF Active Cloud LAN/WiFi board (optional WiFi antenna) |
| Cod. URCLWFS ActiveServer LAN / Wi-Fi board (optional WiFi antenna) |
| Cod. URCLWFA WiFi antenna |
| Cod. URCLWFMP Mounting Kit for Active Cloud/ Active Server board: cable 12V, flat cable Modular Plus, top riser and 4X10 mm spacers |
| Download | Modular 8 Plus data sheet |